To install the GPIB-USB interface, connect the USB connector from the GPIB-USB interface to a USB port on your computer. Before connecting the GPIB-USB interface to GPIB devices, ensure that the computer and the GPIB devices are at the same ground potential. The GPIB-USB interface connects directly to most GPIB devices without requiring a GPIB cable.

Configuration: GPIB HS488: Up to 7230 kbytes/s Part Number: 187965B-01 View Photo of Accessories. May 2, 2012 - You need to install the driver for the GPIB-USB cable, and registration process is quite simple. For the registration, basically you just need to leave a email address of yours. After you install the driver, you can find many useful information in their 'help'. Generally you need to read the user manual of your.

If your computer is already running, the operating system automatically detects the GPIB interface. Otherwise, the GPIB interface is detected when you start your computer. GPIB-USB Interface. Caution: The GPIB-USB hardware does not have isolation built into it.

If your system involves different ground potentials, the voltage difference could surge through the GPIB hardware and cause damage. This situation most often occurs when the PC is a laptop running on a battery and the GPIB device is powered by an AC wall connection. Senarai Program Asasi Usm more. To prevent damage to the GPIB-USB hardware or other components in your system when different ground potentials are involved, do any of the following: • Buy a GPIB-120A, which can provide up to 1,600 V electrical isolation between GPIB systems. You can find these at ni.com.

• Buy a pair of GPIB-140A units, which extend a GPIB system using fiber optics. Because the GPIB signals at each end are transformed into fiber-optic signals, each unit can reside at a different ground potential.

You can also find these at ni.com. • Use a USB isolated hub. NI does not sell these, but you can purchase them online or in stores. • Change the system Set Up so that all components in the system share the same earth ground to eliminate the possibilities of voltage differential running through the system. The GPIB hardware installation is now complete. GPIB Configuration Use the following video tutorials or the document below to assist you in completing this task: The Measurement & Automation Explorer (MAX) utility comes with the NI-488 driver for your GPIB controller. MAX makes GPIB instrument detection and control easy by providing tools that help you search for connecting instruments, and send and receive communication with your device.

Open MAX by clicking on the icon on your desktop or by going to Start»Programs»National Instruments»Measurement & Automation. Auto Ftp Manager 5.1 Serial here. MAX Main Menu To confirm that your GPIB device is connected properly, expand the Devices and Interfaces subdirectory below My System. Then select your GPIB controller.

This tutorial uses a USB-GPIB-HS controller. If you are using a PCI, serial, or Ethernet controller/converter, the name may be slightly different. Click on Scan for Instruments. Scanning for Instruments in MAX If your GPIB device is SCPI-compliant, the name and address appear in the lower main window of the Properties tab once the instrument scan is complete. GPIB Device Found If your device did not appear, refer to. Also refer to. MAX creates the necessary resources for VISA communication with your GPIB instrument.